Gravel & Aggregate Calculator
Estimate gravel volume for driveways, paths, parking areas and landscape beds. Add separate project areas, then review volume and optional purchasing estimates using supplier details.
Gravel & Aggregate Calculator
Estimate aggregate volume, optional weight, bags, truckloads and material cost for one or more project areas.
Loading calculator…
What the Gravel & Aggregate Calculator estimates
Gravel is sold for many different jobs: driveway surfaces, compacted paths, parking areas, drainage beds and landscape areas. These projects may use different stone sizes and different installation methods. The ProjectGauge Gravel Calculator estimates the material volume from the area and depth you enter, then provides optional estimates for weight, bags, material cost and truck trips.
The calculator supports rectangular, circular, triangular, trapezoidal, circular-ring and known-area layouts. You can add separate areas when the project has more than one shape or depth. The selected material type and density assumption should match the product being ordered.
Measure the area to be covered
For a rectangle, multiply length by width. For a circle, use π multiplied by the radius squared. A triangle uses base multiplied by height and divided by two. A trapezoid uses the average of its two parallel sides multiplied by the perpendicular height. A circular ring uses the outer circle area minus the inner opening area. Choose Known Area when the surface area has already been measured.
Enter each project area as its own row when its shape or dimensions differ. Use the quantity field for identical areas. Do not include the same driveway section in two rows, and do not enter the full property area when only part of it is receiving gravel.
Volume from area and depth
The basic volume formula is:
Net volume = total area × target depth
In US Customary mode, area is entered in square feet and depth in inches, so the calculator converts inches to feet before multiplying. In Metric mode, area is in square meters and depth in centimeters; centimeters are converted to meters. The net geometric result is then expressed in cubic feet, cubic yards and cubic meters.
Example: a rectangular driveway section is 20 feet long and 10 feet wide, with a planned surface depth of 4 inches. The area is 200 ft². The depth is 4 ÷ 12 = 0.3333 feet. The net volume is about 66.67 ft³, or 2.469 yd³ and 1.887 m³. This is the volume of the stated rectangular space before compaction or waste assumptions.
Finished depth and loose depth are different
The depth mode tells the calculator how to interpret the measurement. Choose Finished / compacted target depth when the depth represents the finished layer after placement and compaction. Choose Loose material depth when the entered depth already describes the loose material being delivered. A compaction adjustment is not applied to loose-depth mode.
When you use finished depth, the optional compaction / volume-reduction percentage estimates how much loose material is required to achieve the finished volume. The calculator uses:
Loose volume = finished volume ÷ (1 − compaction reduction)
For example, if the finished volume is 2.469 yd³ and a project-specific reduction input is 10%, the loose-volume estimate is about 2.743 yd³. The 10% figure is only an example, not a standard for all gravel. The default compaction adjustment is 0%, which adds no loose-volume uplift. If the installed layer will be compacted, leaving this at 0% may understate the quantity to order. Use a value confirmed by the supplier or installer.
Waste allowance and material weight
Waste or spillage is applied after the compaction adjustment. It is a separate input from compaction. A waste allowance can account for handling losses or a project-specific margin; it should not be used to hide uncertainty about the finished depth or the material’s compaction behaviour.
Volume can be calculated without knowing density. Weight cannot. Gravel density changes with stone type, gradation, moisture, source and how the material is loaded. The calculator offers editable approximate density presets for general gravel, pea gravel, crushed stone, crusher run / road base and river rock. These presets are starting points for planning only. Replace them with supplier information when available.
When a density and truck payload are entered, the calculator can estimate the number of trips by dividing estimated weight by the entered payload and rounding up. Use the vehicle’s actual rated payload and applicable road limits. The calculator does not decide whether a vehicle or trailer is safe or legally loaded.
Bagged gravel or bulk delivery
For bagged products, enter the package volume shown on the bag. The estimated bag count divides the loose order volume by the package volume and rounds up to a whole bag. Do not use bag weight as if it were bag volume. For bulk delivery, enter the supplier’s price per cubic yard and any delivery or other fee. The cost is based on the quantity and price supplied by the user; it is not a live market quote.
Understanding the results
| Result | Meaning |
|---|---|
| Total area | The sum of the areas entered, including each row quantity. |
| Depth interpretation | Whether the input is a finished compacted depth or loose material depth. |
| Net geometric volume | Area multiplied by target depth before adjustments. |
| Loose order volume | The volume after an applicable compaction adjustment and waste allowance. |
| Estimated weight | Order volume multiplied by the density entered. |
| Estimated bags | Order volume divided by the package volume entered, rounded up. |
| Estimated material cost | Order cubic yards multiplied by the entered price, plus the entered fee. |
| Estimated trips | Estimated weight divided by the payload entered, rounded up. |
US and Metric conversions
One cubic yard equals 27 cubic feet. One cubic meter is approximately 35.3147 cubic feet, and one cubic yard is approximately 0.7646 cubic meters. The calculator performs the conversions before showing rounded results. For volume and weight planning, keep the supplier’s quoted unit clear: a US short ton is 2,000 pounds and is not the same as a metric tonne.
For standard unit references, see the NIST volume conversion table.
Choosing the right aggregate
General gravel, pea gravel, crushed stone, river rock and crusher run are not interchangeable. Particle size, gradation, angularity, fines and drainage behaviour differ. A driveway base may call for a compactable graded aggregate, while a decorative bed may use a washed or rounded stone. A drainage detail may specify a particular clean stone size. Match the selected material to the project specification rather than choosing only by the lowest price per yard.
Checks before placing an order
- Confirm the material name, gradation and supplier’s order unit.
- Check that the depth describes either the finished layer or loose material, not a mixture of both.
- Use supplier- or installer-specific compaction and density information where weight or delivery planning matters.
- Confirm the truck payload independently; the trip result is not a safe-load recommendation.
- Ask whether the quote includes delivery, minimum order, placement or unloading charges.
Frequently asked questions
For input instructions, see the Calculator Guides. Other material tools are listed on All Calculators.
Final Words
Measure the area and specify the depth that matches the finished surface or project plan. Check whether your inputs represent loose or compacted material, and use current supplier density and aggregate details when estimating weight or delivery. A truck-payload estimate is not a safe-load approval; verify vehicle limits independently.
Explore more construction and landscaping tools from the ProjectGauge homepage.
