Concrete Block Calculator & CMU Calculator

Estimate concrete masonry unit quantities and approximate mortar volume for a basic rectangular wall.

PROJECTGAUGE 5.0.2

Concrete Block & CMU Calculator

Estimate concrete masonry units and approximate mortar volume for a basic rectangular wall.

Loading ProjectGauge tool…

What the Concrete Block & CMU Calculator estimates

Concrete masonry units (CMU), often called concrete blocks, are commonly used for foundation walls, partitions, garages, retaining structures and other masonry work. The ProjectGauge Concrete Block & CMU Calculator estimates the number of blocks for a basic rectangular wall and provides an approximate mortar-volume calculation from the dimensions entered.

The estimate uses actual block dimensions, mortar-joint thickness, wall length and height, the number of matching wall runs, and the total opening area to subtract. An optional waste allowance can be applied to the block count. Mortar bag quantities and material costs are calculated only when the corresponding product yield and prices are entered.

Measure the wall face and openings

Measure each wall run that uses the same height and block layout. Enter the wall length and wall height, then the number of matching runs. Add the total area of doors, windows and other openings to subtract from the gross wall face. For openings with different sizes, add their areas together before entering the total.

Openings must be entered in the selected area unit. In Metric mode, the calculator converts square meters to square feet internally before working out the block count. If opening area is greater than or equal to the total wall face, the estimate cannot produce a positive net wall area.

Use actual block dimensions

Enter the block’s actual face length, actual face height and depth. Nominal block sizes often include the mortar joint in their stated module size, while the physical unit is smaller. Use the actual dimensions supplied for the selected product. Enter the mortar-joint thickness used for the wall layout; the default values are starting inputs and may not match every unit or installation detail.

The block module face area includes the joint in both directions:

Block module area = (actual block length + joint) × (actual block height + joint)

The base block count is the net wall face area divided by the module face area. The optional waste allowance is then applied, and the number of units is rounded up to a whole block.

Worked example: a simple CMU wall

Consider two matching wall runs, each 20 feet long and 8 feet high. Their combined gross face area is 20 × 8 × 2 = 320 square feet. Suppose the total door and window opening area is 20 square feet. The net wall area is 300 square feet.

Using example actual block dimensions of 15.625 inches by 7.625 inches, and a 0.375-inch mortar joint, the module dimensions are 16 inches by 8 inches. The module face area is 128 square inches, or approximately 0.8889 square feet.

  • Gross wall area: 320 ft².
  • Opening area to subtract: 20 ft².
  • Net wall face area: 300 ft².
  • Block module face area: 0.8889 ft².
  • Base block count: 300 ÷ 0.8889 = 337.5, rounded up to 338 blocks.
  • With a 5% waste allowance: 338 × 1.05 = 354.9, rounded up to 355 blocks.

This is a simplified rectangular-wall example. Actual block counts can change because of corners, bond patterns, cut units, pilasters, lintels, bond beams, reinforcing details and the manufacturer’s actual unit dimensions.

How the mortar estimate works

The calculator provides an approximate mortar volume based on the space represented by the entered block module and joint thickness. It uses the difference between the module face area and the actual block face area, multiplied by the block depth, then multiplies that approximate joint-space volume by the estimated block quantity.

This is not a detailed mortar takeoff. Block profiles, face shells, webs, head joints, bed joints, bond pattern, tooling, workmanship and waste affect real mortar use. The calculation does not measure every joint separately or account for partially filled joints or special masonry units.

Optional mortar bags and material costs

The mortar bag yield field is blank by default because packaged mortar products have different yields. Enter the yield from the current product technical data sheet. The calculator divides its approximate mortar volume by the yield entered and rounds up to whole bags. In Metric mode, the result uses the corresponding cubic-meter yield input. Enter the bag price to include mortar in the material-cost estimate.

You can also enter a block price per unit. The estimated cost is based only on the block count, entered bag yield, and prices supplied by the user. It does not include delivery, labor, reinforcement, grout, lintels, bond beams, equipment or taxes unless separately accounted for in your quote.

Understanding the results

ResultMeaning
Net wall face areaWall length × wall height × number of runs, minus total opening area.
Block module coverageFace area of one block plus the entered joint module.
Blocks before allowanceNet wall area divided by module coverage, rounded up.
Blocks to plan forBase block count plus the entered waste allowance, rounded up.
Approximate mortar volumeEstimated joint-space volume based on the entered block and joint dimensions.
Mortar bagsApproximate mortar volume divided by the product yield entered, rounded up.
Estimated material costBlocks and optional mortar bags multiplied by the entered prices.

US and Metric measurements

The calculator supports US Customary and Metric measurements. Wall dimensions use feet or meters. Actual block dimensions and joint thickness use inches or centimeters. Opening area uses square feet or square meters. The tool converts the values to a consistent internal basis before calculating area, unit coverage and volume.

One square meter is approximately 10.7639 square feet. One inch equals 2.54 centimeters. One cubic meter is approximately 35.3147 cubic feet. Use the unit labels shown beside each input and check the product specification before entering dimensions.

Important masonry details outside this estimate

A block count and approximate mortar volume are only part of a masonry takeoff. Depending on the project, the design may also include corner units, bond-beam units, lintels, reinforcing bars, grout-filled cores, control joints, flashing, damp-proofing, insulation, anchors and special cut units. These items are not calculated by this tool.

The calculator does not determine wall thickness, structural capacity, reinforcement spacing, lintel design, footing size, soil pressure, grout requirements or building-code compliance. Use the construction documents, local requirements and product installation instructions for those decisions. Seek qualified design advice where the wall has structural or retaining functions.

Checks before ordering

  • Use the actual physical block dimensions rather than relying only on a nominal catalog size.
  • Measure every wall run and add openings accurately.
  • Use the actual joint thickness required by the selected unit and laying method.
  • Confirm the block bond, corners, cuts and special units against the wall plan.
  • Use the current mortar product yield rather than a generic bag estimate.
  • Keep reinforcement, grout, lintels and other materials on separate takeoff lines.

Frequently asked questions

It subtracts the total opening area you enter from the gross wall face. Measure the openings and add their areas together before entering the value.

Enter the actual physical unit length, height and depth. The calculator adds the mortar joint separately to create the module dimensions.

No. It is a simplified joint-space estimate. Actual mortar use depends on block profile, joint details, bond pattern, workmanship and waste.

Yes, when the wall runs have matching dimensions and block details, enter the number of runs. For different heights, block sizes or joint details, calculate each group separately.

No. It is a material quantity estimator. It does not calculate reinforcement, lintels, bond beams, grout, structural capacity or code compliance.

For measuring instructions, see the Calculator Guides. Related tools are listed on All Calculators.

Final Words

Use the actual physical block dimensions, include all wall runs and openings, and review the mortar-joint assumptions before ordering. Mortar volume is an approximation and may vary with block profile, bond and workmanship. This quantity tool does not design reinforcement or verify structural wall requirements.

Explore more construction and landscaping tools from the ProjectGauge homepage.