French Drain Calculator
Estimate trench excavation, perforated pipe, drainage gravel and filter fabric quantities for a basic French drain run.
French Drain Calculator
Estimate trench excavation, perforated pipe, drainage gravel and filter fabric.
Loading ProjectGauge tool…
What the French Drain Calculator estimates
A French drain is a subsurface drainage system that uses a trench, perforated pipe and drainage aggregate to collect and move water toward a suitable outlet. A filter fabric or geotextile may be used as part of the specified installation to separate the aggregate from surrounding soil. The ProjectGauge French Drain Calculator estimates basic trench excavation volume, pipe length, pipe displacement, drainage-gravel volume and filter-fabric area from the dimensions entered.
The calculator provides a simplified material takeoff. It does not design a drainage system, choose an outlet, calculate hydraulic capacity or determine local stormwater requirements. Confirm the intended drainage detail and discharge point before excavation.
Measure the trench dimensions
Enter the length, width and depth of the trench, the pipe diameter and the number of matching drain runs. The trench width, trench depth, pipe diameter and fabric overlap are entered in inches or centimeters. Length is entered in feet or meters. When there are several identical runs, use the run quantity; for different trench dimensions, calculate separate estimates.
Check whether the dimensions describe the actual space to be excavated. A trench with irregular sides, a sloped bottom, bends, fittings or changing depth is more complex than the straight rectangular model used by the calculator.
Excavation volume and pipe displacement
The trench is treated as a rectangular prism. Its volume is:
Trench volume = length × width × depth × number of runs
The pipe also occupies space inside the trench. The calculator estimates the pipe displacement as a cylinder:
Pipe displacement = π × (pipe diameter ÷ 2)² × total pipe length
The remaining trench volume is used as the starting space for drainage aggregate. This is a geometric estimate; couplings, fittings, pipe perforations, bedding details and changes in trench shape are not modeled individually.
Worked example: a straight drain run
Suppose a trench is 50 feet long, 12 inches wide and 18 inches deep, with one 4-inch perforated pipe. The calculator’s geometry gives the following approximate quantities:
- Trench width: 12 inches = 1 foot.
- Trench depth: 18 inches = 1.5 feet.
- Excavation volume: 50 × 1 × 1.5 = 75 ft³.
- Pipe diameter: 4 inches = 0.3333 feet.
- Pipe displacement: π × (0.3333 ÷ 2)² × 50 = approximately 4.36 ft³.
- Space after pipe displacement: 75 − 4.36 = approximately 70.64 ft³.
With 100% gravel fill and a 10% extra-length / waste allowance, the gravel order volume is approximately 77.70 ft³, or 2.878 yd³. This example assumes a full aggregate envelope around the pipe. The actual stone envelope should follow the drainage plan, product requirements and site conditions.
Gravel fill percentage
The gravel fill percentage controls the share of the remaining trench space that is treated as drainage aggregate. The default 100% represents the full simplified trench space after pipe displacement. Use a lower percentage only when the project has a defined partial aggregate envelope. Do not use this setting as a substitute for designing the stone envelope or specifying the actual trench cross-section.
The calculator applies the entered extra-length / waste percentage after the gravel fill percentage. It is a separate planning allowance for quantity estimation; it does not increase pipe length or fabric area.
Filter fabric coverage
The filter-fabric estimate uses a simplified U-shaped wrap. It multiplies total trench length by the trench width plus twice the trench depth plus one overlap allowance:
Fabric area = total trench length × (trench width + 2 × trench depth + overlap)
For the example above, if the overlap input is 12 inches (1 foot), the simplified fabric width is 1 + 2 × 1.5 + 1 = 5 feet. A 50-foot run therefore gives approximately 250 square feet of fabric.
Actual fabric layout depends on the drainage detail, fabric roll width, seams, overlaps, end treatment and the product’s installation instructions. The calculator does not select a geotextile grade or create a cutting plan.
Understanding the results
| Result | Meaning |
|---|---|
| Excavation volume | Rectangular trench volume across the number of runs. |
| Pipe length | Entered length multiplied by the number of runs. |
| Pipe displacement | Approximate cylindrical volume occupied by the pipe inside the trench. |
| Drainage gravel order volume | Trench volume minus pipe displacement, adjusted by gravel fill and waste inputs. |
| Filter fabric area | Area estimated from a U-shaped trench wrap with one overlap allowance. |
| Approximate gravel weight | Gravel volume multiplied by the density entered. |
| Estimated entered material cost | Entered gravel, pipe and fabric rates multiplied by their respective quantities. |
Optional weight and material costs
When you enter gravel density, the calculator can estimate weight from the drainage-gravel volume. Density changes with aggregate type, gradation, moisture and supplier. Use a supplier value when weight affects transport or purchase decisions. A generic density should be treated only as an approximate planning input.
Optional cost inputs are provided for gravel per cubic yard, pipe per linear foot and fabric per square foot. The calculator adds the quantities multiplied by the entered prices. Delivery, excavation, soil disposal, fittings, outlet components, filter socks, labor, equipment and taxes are not automatically included.
Unit conversions
For US inputs, length is converted to feet and trench width, depth, pipe diameter and overlap are converted from inches to feet. Metric inputs are converted to the same internal basis before the volumes are calculated. Results are displayed in cubic feet, cubic meters, cubic yards, linear feet / meters and square feet / meters.
One cubic yard equals 27 cubic feet. One cubic meter is approximately 35.3147 cubic feet. One foot equals 12 inches, and one meter equals 100 centimeters. For standard volume conversion factors, see the NIST conversion table.
Drainage design matters
A drain must have a suitable collection point and discharge route. Pipe slope, perforation orientation, outlet protection, filter fabric, gravel gradation and trench location depend on the site and drainage plan. Local rules may govern where collected water can be discharged. Water should not be redirected toward a neighboring property, building foundation or public right-of-way without confirming the requirements.
This calculator does not determine hydraulic capacity, slope, pipe size, outlet elevation, water-table conditions, soil permeability or geotextile specification. It does not replace a drainage plan, site inspection or applicable local approvals. Have the design reviewed where water management could affect structures, slopes or neighboring properties.
Checks before ordering
- Confirm trench dimensions and number of runs from the site plan.
- Check the inside and outside pipe dimensions where they matter to the specified drain detail.
- Confirm the gravel-fill percentage and stone envelope against the installation plan.
- Use the specified overlap and fabric arrangement, not just the default input.
- Confirm gravel gradation, delivered density and supplier order unit.
- Include fittings, outlet components, excavation and disposal in the broader project takeoff.
Frequently asked questions
For input instructions, see the Calculator Guides. More construction and landscape estimates are listed on All Calculators.
Final Words
Check trench length, width and depth, pipe dimensions, gravel fill percentage and fabric overlap before using the result. The calculator estimates basic quantities only; drain slope, outlet location, capacity and discharge requirements must be established from the site plan and applicable local requirements.
Explore more construction and landscaping tools from the ProjectGauge homepage.
